2222 Threadlocker (hand tools disassemble)

Low strength, thixotropic viscosity

Can be disassembled with hand tools.

Used for thread M2-M8 (Ideal for under M6).

2242 Threadlocker (general purpose)

Medium strength, thixotropic viscosity.

Controlled lubricity for accurate clamp loads.

Can be disassembled with hand tools.

Used for thread M8-M16.

2262 Threadlocker (general purpose)

Medium to high strength, thixotropic viscosity.

Excellent chemicals resistance.

Controlled lubricity for accurate clamp loads.

Can be disassembled with hand tools.

Used for thread M10-M26 (Ideal under M20).

2271 Threadlocker

High strength, medium to low viscosity.

Excellent chemicals resistance.

Controlled lubricity for accurate clamp loads.

May require localised heat for removal.

2277 Threadlocker (high strength)

◆ High strength, high viscosity.

◆ Excellent chemicals resistance.

◆ Controlled lubricity for accurate clamp loads.

◆ May require localised heat for removal.

2290 Threadlocker (wicking grade)

◆ Medium strength.

◆ Excellent chemical resistance.

◆ Used for locking preassembled fasteners under M12.

◆ Also used for sealing 0.1mm weld seam, crack, dispersed shrinkage and micro pores on castings.

2577 Thread Sealant (high viscosity)

◆ High strength, in paste, thixotropic viscosity, instant seal.

◆ Contains no fillers, no foul to pipeline system.

◆ Fast curing, suitable for large gap sealing

2609 Anaerobic Retaining Compound (low viscosity)

◆ High strength.

◆ Seals and secures cylindrical assemblies under 0.13mm diametral clearance.

◆ Designed for transition fit and interference fit. Enhances bonding strength for press fit assemblies

2648 Anaerobic Retaining Compound (fast cure)

◆ High strength, medium to low viscosity.

◆ Withstands high temperatures to 175℃

◆ Seals and secures cylindrical assemblies under 0.15mm diametral clearance.

◆ Fixtures in 5 minutes.

◆ Designed for transition fit and interference fit.

2661 UV Anaerobic Retaining Compound (dual cure)

◆ High strength, UV & anaerobic dual curing.

◆ Withstands high temperatures to 175℃

◆ Seals and secures cylindrical assemblies under 0.15mm diametral clearance.